2017-07-21

Setup ILO for booting ASC(host) automatically - Netra X3-2 Version 3.1.2.18 r81429


If ILO is not in manufacturing mode, You can set ILO on console as below.

set /SP/policy HOST_AUTO_POWER_ON=enabled         // A host server turn on automatically.

start /System           // A host server is booted.
start /HOST/console        // You can see the console screen of the host server.

If ILO is in manufacturing mode as below, You can set ILO on console as below.
=================================================
ORACLESP-1622NM200W login: root
Password: changeme

Oracle(R) Integrated Lights Out Manager

Version 3.1.2.18 r81429

Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.

Warning: The system appears to be in manufacturing test mode.
Contact Service immediately.

Warning: password is set to factory default.
=================================================

cd /SP                  // change directory
set reset_to_defaults=factory       // the ILO is changed to factory setting

Power off/on

set /SP/serial/host pendingspeed=115200 commitpending=true      // The host console speed is 115,200. It'll match 115,200 speed between ILO and host.
set /SP/policy HOST_AUTO_POWER_ON=enabled         // A host server turn on automatically.

start /System           // A host server is booted.
start /HOST/console        // You can see the console screen of the host server.

The result after reset factory
=================================================
ORACLESP-1622NM200V login: root
Password:

Oracle(R) Integrated Lights Out Manager

Version 3.1.2.18 r81429

Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.

Warning: password is set to factory default.
=================================================